Translate is done by Google Translate

Emergency exit lock with catch and hook bolt with 90 ° key rotation. The door handle trap is pulled into the lock case with the door handle. The chin bolt is pulled into the lock case with a wrench or knob. From the inside, the door handle trap and chin bolt can be pulled into the lock case with the emergency exit handle. Connect 710 lock case can be delivered with micro contact (ME). This gives an indication of locked / unlocked, as well as the use of the emergency exit lever. The lock case can be used for emergency exit doors where locking with a latch, door handle trap holding and approved one-handle opening is required. Always used with Ruko emergency exit bracket 179A.

Approvals and markings

EN179 Emergency output hardware. The lock case is approved for use in doors classified as emergency exit doors.

Technical specifications

Trap that tolerates a skew between door and frame of ± 4 °. Chin bolt lock with 90 ° key rotation. Lock boxes with mandrel dimensions 50 and 70 mm can be fitted with Ruko safety cylinder or oval cylinder. Available in 35, 50 and 70 mm mandrel sizes. The post is made of glossy zinc-treated steel, which provides a resistant and neutral surface that fits into all environments. Turn of turned steel with glossy zinc treatment.